THIS HOLE CUTTER CUTS HOLES FROM 30MM TO 120MM!

The Adjustable Hole Boring Tool can be used to cut holes in a variety of materials, including wood, plastic, gypsum board, PVC sheet, glass, and porcelain. The tungsten carbide blade has a range of 30-120mm of adjustment. This Adjustable Hole Cutter is compatible with any variable speed drill, and it even includes a round-tipped bit for use at lower RPMs.

The Adjustable Hole Boring Tool features two adjustable blades for a wider range of hole diameters.

Features:

• Adjustable - On opposite sides of the measure-bars, there are two sharp blades that can be adjusted. The distance between the cutter bit and the center can be used to modify the hole diameter.
• Practical - Plywood, laminate, composite materials, rubber, plastic, and other materials can all be cut with this tool. The alloy cutter bit is sharp and practical, and after grinding, it may be reused. Solid hex shanks prevent slippage during operation, and chucks with a diameter of 10mm or greater are ideal.
• Sturdy & Durable - For a long life, choose high-quality carbon steel. A visible scale on the valve body allows for quick measurement and exact cutting.
• Premium Material - Made of high-quality materials, this product is practical, easy to install and use, and has a wide range of applications. It also has a long service life.
• Professional Design - The operation is simple, the opening is neat, the blade is sharp, the chip removal is smooth, and the operation is simple. Perfect for installing locks, knobs, and other hardware in doors and cabinets, as well as drilling bigger diameter holes in desks and other furniture.

Specification:

• Hole Diameter: 1-3 / 16" - 12"(30 - 300mm)
• Cutting Depth: 1/8 "-2"(3 - 50mm)
• Shank Diameter: 3/8" (10mm)
• High Quality Material: Carbon steel

Notice:

1. Before beginning the operation, ensure that all screws are fastened.
2. You avoid mishaps, be sure to grip it while operation.
3. When drilling, ensure that the distance on both sides is equal. The force will be unequal if they are not equal.
4. Tighten the screws with a hexagon wrench to adjust the appropriate size.
5. The power must be switched off while replacing the drill.
6. Do not use on steel or other metal plates.
7. The drilling speed must be slow, and the drilling material must be free of iron, nails, and other metals.
8. Ceiling holes cannot be drilled backwards; only vertical holes from top to bottom can be drilled.
9. Instead of cleaning by hand, the cuttings generated during the drilling operation should be cleaned with appropriate instruments.

Package Includes:

• 1 x Adjustable Hole Cutter
• 1 x Rounded Tip
• 1 x Allen Wrench